isometric isometric title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by kc26a30.001nls 1.5:1 3/5/2001 g510250 c cjb 1 1 a 1 2 3 4 5 6 7 8 9101112 contact configuration timing (bbm) non-shorting a a c 8.00 [.315 in] 2.00 [.079 in] 30.00 [1.181 in] 2.00 [.079 in] 14.20 [.559 in] 6.30 [.248 in] 2 7 . 5 0 [ 1 . 0 8 3 i n ] n 26.00 [1.024 in] note: 1. all dimensions in mm[inch]. 2. general tolerance: x.x= ` 0.4 x.xx= ` 0.25 3. term. nos. for referance only. 4. contact material: silver 5. contact rating: 150milliamp, 250vac/dc 350milliamp, 110vac/dc 6. contact rating (non-switching) 5a 7. operating force 425 ` 100cm/standard 8. operating temp: -30 ~ c to 85 ~ c 9. ciruit dp: 6 position 30 ~ index. 10. dielectric strength: 1000v rms min.@ sea level. 11. hardware supplied on switch: lockwasher, hexnut, stop ring 12. denotes critical parameter. hardware suppied on switch b 14498 revised and redrawn 11/12/04 ar 3/8-32 unef-2a threads 38.00 [1.496 in] 5.50 [.217 in] flat n 3.00 [.118 in] 30.0 c 15702 add stop ring to hardware 1/25/06 ph
|